[Upgraded from existing Needle RF, improved pores and acne scars] Ellysis RF Laser

Elysis Needle Fractional RF

Consideration and effort to enhance treatment satisfaction

Elysis RF is a treatment that delivers high-frequency energy to the dermal layer by closely attaching micro-needles to the skin.

This device selectively utilizes 1MHz and 2MHz frequencies and applies a 49-pin non-insulated and dual-depth insulated structure.

This is a needle RF device that helps plan management for various skin concerns simultaneously with a single treatment.

Features and Expected Effects of Elysys RF

1) Non-insulated 49-pin Tip Application

Non-insulated Tip for Pore and Acne Scar Management

When the tip is applied once, 49 electrodes reach the dermal layer to deliver high-frequency energy.

This creates a density of micro-coagulation zones, which can help improve pores and skin texture.

→ Even with a single treatment, dense stimulation is delivered, allowing for consideration of management efficiency.

2) Insulated Dual-Depth (2-depth) Structure

Insulated Tip for Fine Line and Lifting Management

The Elysyls insulated tip can sequentially deliver energy to two depths with a single insertion.

→ This method can help reduce epidermal damage, minimizing recovery burden, while improving skin through collagen rearrangement in the deep dermal layer.

3) 1MHz and 2MHz Frequency Selection Function

1MHz (Low-frequency range): This frequency is designed to deliver energy deep into the skin and can be used for lifting, elasticity improvement, deep wrinkles, enlarged pores, and scar base management.

2MHz (Relatively high-frequency range): This frequency primarily acts on the epidermis and upper dermal layer, contributing to sebum gland regulation, pore edge management, fine wrinkles, surface texture, and redness improvement.

→ During treatment, 1MHz (deep layer) and 2MHz (superficial layer) frequencies can be selectively applied to meticulously plan the treatment according to the individual's skin condition.

4) Efforts for treatments with over 350 shots

A typical full-face 2-pass treatment is based on approximately 300 shots, with an additional 50 shots overlapping on main concern areas, aiming for a total of over 350 shots.

Through Elysyls' 49-pin and dual-depth structure, sufficient energy delivery during treatment is ensured.

5) Customized Treatment Plan Establishment through Precise Diagnosis

Using a Mark-Vu diagnostic device, the condition of sebum, pores, wrinkles, pigmentation, and redness is precisely identified. For areas with complex skin concerns, 2MHz (surface and upper) and 1MHz (deep layer) frequencies can be sequentially applied to the same area.

Subsequently, skin boosters tailored to skin concerns can be applied in multiple stages to enhance absorption and promote synergy.

Treatment Protocol Guide

1) Precise Skin Analysis and Diagnostic Map Creation (Utilizing Mark-Vu)

Acne: By understanding sebaceous gland activity, inflammation, and redness distribution, a non-insulated tip (for sebum/pores) and 2MHz frequency (for redness) can be applied together.

Acne Scars: By categorizing types such as boxcar, rolling, and red scars, a treatment plan is established to apply 1MHz frequency (deep layer) and a non-insulated tip (surface resurfacing) in an overlapping manner.

Considering skin concerns and lesion characteristics, the Hertz (Hz) setting and insulated/non-insulated modes are selectively applied to proceed with the treatment.

2) Shot and Pass Design — Over 350 shots recommended

Approximately 300 shots may be used for a 2-pass treatment on the entire face.

For main areas, more than 50 overlapping shots are applied to intensively deliver energy.

1MHz and 2MHz frequencies are adjusted and applied according to the treated area and lesion characteristics.

3) Skin Booster Layering Application (Stage 1→Stage 2→Stage 3)

Stage 1 (Surface Layer): Can help resolve surface skin concerns such as pores, pigmentation, and redness.

Stage 2 (Dermal Layer): Aims to promote collagen regeneration, focusing on fine lines and scar areas.

Stage 3 (Intensive Overlap): For areas with complex skin concerns, energy is overlapped and re-irradiated, effectively penetrating highly concentrated active ingredients.

4) Overlap Design for Complex Skin Concerns (Example)

Pores and Acne: By utilizing a non-insulated 49-pin tip and 2MHz frequency to help control sebum and improve the surface, insulated 1MHz can then be used to deliver energy to the deep layers of the skin.

Scars & Redness: We can consider applying an insulated 1MHz frequency to the base of scars, and utilizing a 2MHz frequency together for redness improvement.

Fine Lines & Acne Scars: A 2MHz frequency can be used for fine lines and surface improvement, and a non-insulated 49-pin tip can be applied concurrently to widely and uniformly manage the upper dermal layer.

Treatment Principle of Elysion RF Laser

Needle RF is a procedure that delivers high-frequency energy to the desired skin depth using micro-needles. Through this process, improvement in skin structure can be expected.

Tiny coagulation points can form in the area where Needle RF is applied.

These coagulation points can stimulate fibroblasts in the skin, helping to promote collagen and elastin production.

Non-insulated method delivers high-frequency energy to a wide area from the epidermis to the upper dermis, while the insulated method is used to precisely stimulate specific target dermal layers.

Elysion's Dual Depths Insulated Technology delivers energy to two different depths with a single penetration, reducing discomfort during treatment and positively impacting structural changes in the skin.

Description of Elysion Sense RF (Equipment and Tip Guide)

Non-insulated 49-pin tip: Thermal energy is generated from the entire needle, delivering widespread and even stimulation from the skin surface to the upper dermal layer. This can be effectively used for managing pores, sebum problems, and surface scars. Additionally, due to a higher number of pins compared to a standard 25-pin tip, the effective stimulation density can be higher with the same number of shots.

Insulated Dual Depths Tip: High-frequency heat is generated only at the tip of the needle, allowing energy to be continuously delivered to two different depths with a single treatment. This can help induce improvement in the deeper parts of the skin while minimizing damage to the epidermal layer.

Adjustable Needle Length (Precise Targeting): The depth can be adjusted in 0.x mm increments to suit the skin thickness or characteristics of the treatment area. This makes it easy to selectively control specific tissues such as sebaceous glands, sweat glands, and under-eye fat.

Expected Improvements After Treatment

1) Skin lifting and elasticity improvement, as well as reduction of deep or shallow wrinkles, can be expected.

2) It can help reduce pore size, balance sebum secretion, and refine skin texture.

3) Simultaneous improvement of acne scars (pitted marks, red marks)

4) Alleviation of skin redness and skin tone equalization

5) Improvement of pigmentation conditions(alleviating the burden of recurrence for melasma and other pigmentation issues)

Who Should Consider This Treatment

1) Those concerned about rolling or boxcar acne scars and red marks

2) Those experiencing difficulties with enlarged pores, rough skin texture, excessive sebum, or frequent breakouts

3) Those noticing visible fine lines or decreased skin elasticity

4) Those with rosacea or sensitive skin and recurring pigmentation issues

5) Those considering needle RF treatment, expecting skin improvement with relatively fewer sessions(proceeds considering per-shot efficiency and frequency matching)

Treatment Process

1) To check skin condition, photos are taken after cleansing, followed by an initial consultation with Mark-Vue and a detailed consultation with the director.

2) The treatment area is designed, and individual parameters such as depth, output, mode, pass, overlap, and frequency are delicately set according to the skin type.

3) Needle RF treatment is performed in two stages, using over 350 shots, with additional overlap treatment applied to areas of particular concern.

4) If necessary, a layering technique applying skin boosters in multiple layers from stage 1 to stage 3 can be combined.

5) After the treatment, Jauungo modeling pack is used to reduce skin heat.

Post-Treatment Precautions & Side Effects

Erythema·Edema: Redness (erythema) or swelling (edema) may appear in the treated area. Most cases subside within 6 hours, but for some individuals, it may persist for 2~3 days.

Micro-scabs: Small, fine scabs may form, which should be allowed to fall off naturally and not be picked at.

The following activities should be avoided for 3-4 days: sauna, jjimjilbang (Korean dry sauna), swimming, alcohol consumption, smoking, strenuous exercise

Post-Treatment Care Routine: It is important to focus on sufficient sunscreen use, ample moisturizing care, and hydration.

Possible Symptoms: Symptoms such as temporary skin troubles, itching, stinging, or bruising may occur.